Skip to Content

Test sajn Login

Run the full sajn Login flow against BankID's test environment with a test BankID

You can run the complete login flow — real BankID protocol, real QR codes, real app — without touching a real identity.

How test mode works

A client runs on a certificate, and every certificate is either a test or a production certificate. A client pointed at a test certificate:

  • talks to BankID's test environment instead of production
  • accepts only test BankIDs issued from demo.bankid.com
  • can never authenticate a real person

The environment is a property of the certificate, not a flag you pass. There is no request that can make a production client behave like a test one, or vice versa — which is exactly the point.

Ask sajn to point your client at a test certificate while you integrate. Everything else — the issuer, endpoints, scopes, claims, token validation — is identical to production, so nothing about your integration changes when you switch.

1. Install the BankID test app

The production BankID app will not work against the test environment. You need the separate test build from BankID's developer portal.

On mobile, the test app usually cannot be installed alongside the production BankID app. Use a spare device, or the desktop test app, if you rely on your real BankID day to day.

2. Create a test BankID

Go to demo.bankid.com and issue a test BankID for any personnummer — for example 199001011234. The number does not need to belong to a real person; the test CA will issue for anything well-formed.

Make a couple with different names. Testing "returning user gets the same sub" and "a different person gets a different sub" needs two identities.

3. Run the flow

Point your integration at the same issuer as always:

https://login.sajn.se

Then run your normal login. Scan the QR with the test app, complete it, and you should get an id_token back with your test identity's name and personnummer.

What to test

The happy path

Authorize → hosted page → BankID → redirect → token exchange → validated id_token. Confirm iss, aud and the signature all check out against JWKS.

A returning user

Log in twice with the same test BankID. sub must be identical both times — that is your user key, and your account lookup depends on it.

Cancellation

Start a login and cancel in the app. You should land back on your redirect_uri with an error parameter, not hang.

The abandoned browser

Complete BankID, then close the browser before it redirects. Your webhook (or a poll of the session) should still report success — this is the most commonly missed case on mobile.

Expiry

Open a login URL, wait, then let it sit. After 15 minutes it should show the invalid-link screen rather than starting a fresh BankID.

Replay

Exchange the same authorization code twice. The second attempt must fail with invalid_grant.

Timings you will notice

These come from BankID and are the same in test and production:

QR code refreshEvery second
Scan window2 minutes, then the page offers to extend
After scanning~3 minutes to complete in the app
Login URL lifetime15 minutes
Authorization code lifetime60 seconds, single use

Going live

When you are ready, sajn switches your client to a production certificate. Nothing in your code changes — same issuer, same client id, same endpoints.

From that moment the client authenticates real people and every successful login is billed. Make sure your redirect URIs point at production before the switch.

Troubleshooting

The BankID app says the QR code is invalid

You are almost certainly scanning with the production app against a test client. Use the test app from the developer portal.

Your real BankID does not work

Correct, and intentional. A test client only accepts test BankIDs.

Nothing happens after scanning

Check that your redirect_uri is reachable from the device — localhost on a phone means the phone, not your laptop. Use a tunnel or a deployed preview URL.

Was this page helpful?

Last updated on